[PATCH 4/4 v7] Menu support for TVP7002 in DM365

Previous Topic Next Topic
 
classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|

[PATCH 4/4 v7] Menu support for TVP7002 in DM365

santiago.nunez@ridgerun.com
From: Santiago Nunez-Corrales <[hidden email]>

This patch provides menu configuration options for the TVP7002
decoder driver in DM365.

Signed-off-by: Santiago Nunez-Corrales <[hidden email]>
---
 drivers/media/video/Kconfig  |   32 ++++++++++++++++++++++++++++++++
 drivers/media/video/Makefile |    2 ++
 2 files changed, 34 insertions(+), 0 deletions(-)

diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index e6186b3..f33652e 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -392,6 +392,15 @@ config VIDEO_TVP5150
   To compile this driver as a module, choose M here: the
   module will be called tvp5150.
 
+config VIDEO_TVP7002
+ tristate "Texas Instruments TVP7002 video decoder"
+ depends on VIDEO_V4L2 && I2C
+ ---help---
+  Support for the Texas Instruments TVP7002 video decoder.
+
+  To compile this driver as a module, choose M here: the
+  module will be called tvp7002.
+
 config VIDEO_VPX3220
  tristate "vpx3220a, vpx3216b & vpx3214c video decoders"
  depends on VIDEO_V4L2 && I2C
@@ -466,6 +475,29 @@ config VIDEO_THS7303
   To compile this driver as a module, choose M here: the
   module will be called ths7303.
 
+config VIDEO_THS7353
+ tristate "THS7353 Video Amplifier"
+ depends on I2C
+ help
+  Support for TI THS7353 video amplifier
+
+  To compile this driver as a module, choose M here: the
+  module will be called ths7353.
+
+config VIDEO_THS7353_LUMA_CHANNEL
+ int "THS7353 channel number for Luma Input"
+ default 3
+ depends on VIDEO_THS7353
+ help
+  Select the luma channel number for the THS7353 input.
+
+  THS7353 has three identical channels. For the component
+  interface, luma input will be connected to one of these
+  channels and cb and cr will be connected to other channels
+  This config option is used to select the luma input channel
+  number. Possible values for this option are 1,2 or 3. Any
+  other value will result in value 2.
+
 config VIDEO_ADV7343
  tristate "ADV7343 video encoder"
  depends on I2C
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index e541932..d9a421a 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -53,9 +53,11 @@ obj-$(CONFIG_VIDEO_BT856) += bt856.o
 obj-$(CONFIG_VIDEO_BT866) += bt866.o
 obj-$(CONFIG_VIDEO_KS0127) += ks0127.o
 obj-$(CONFIG_VIDEO_THS7303) += ths7303.o
+obj-$(CONFIG_VIDEO_THS7353) += ths7353.o
 obj-$(CONFIG_VIDEO_VINO) += indycam.o
 obj-$(CONFIG_VIDEO_TVP5150) += tvp5150.o
 obj-$(CONFIG_VIDEO_TVP514X) += tvp514x.o
+obj-$(CONFIG_VIDEO_TVP7002) += tvp7002.o
 obj-$(CONFIG_VIDEO_MSP3400) += msp3400.o
 obj-$(CONFIG_VIDEO_CS5345) += cs5345.o
 obj-$(CONFIG_VIDEO_CS53L32A) += cs53l32a.o
--
1.6.0.4